Advertising industry use fiber laser cutting machine – Catherine

Advertising industry use fiber laser cutting machine

Nowadays, the advertising industry needs more and more materials. In addition to some commonly used materials such as acrylic, galvanized sheet and wood, iron sheets, carbon steel, stainless steel and titanium steel sheets are also used more and more, which also makes fiber lasers. Then the demand for cutting machines is getting bigger and bigger, so what are the advantages of fiber laser cutting machines? So you can see advertising industry use fiber laser cutting machine.

1. High cutting precision:

Laser cutting machine positioning accuracy is 0.05mm. And repeat positioning accuracy is 0.03mm.

2. The slit of the laser cutting machine is narrow:

And the laser beam focus into a small spot, the power at the focus reaches the maximum. And the material quickly heat until vaporized and evaporated to form a hole. As the beam moves linearly, the hole continuously form. Narrow slits, the width of the slit is generally 0.1-0.2 mm.

3. The cutting surface of the laser cutting machine is smooth:

Then the cutting surface has no burrs, and the surface roughness of the cutting surface is generally controlled within Ra6.5.

4. Laser cutting machine speed:

Cutting speed up to 10m / min maximum positioning speed of up to 30m / min faster than wire cutting speed.

5. Laser cutting machine cutting quality is good:

No contact cutting, the edge less affect by heat. And basically no thermal deformation of the workpiece, completely avoiding the material form by the collapse of the punching. Then the slit generally does not need secondary processing.

6. No damage to the workpiece:

The laser cutting head will not touch the surface of the material, so it will not scratch the surface of the workpiece.

7. Not affected by the shape of the workpiece:

Laser processing is flexible, can process any special-shaped graphics, but also can cut pipes and other various shaped materials.

8. Laser cutting machine can cut a variety of materials:

such as plastic, wood, PVC leather, textiles, plexiglass and so on.

9. Saving mold investment:

Laser processing does not need molds, no mold consumption, no need to repair and repair molds frequently. And saving mold time, thus saving mold processing costs and reducing production costs. Then especially suitable for processing and processing of large products.

10. Material saving:

Computer programming can use to cut products of different shapes to maximize the utilization of materials.

11. Improve the speed of sample delivery:

After the product drawings form, they can process immediately. And new products can produce in the shortest time.

12. Safety and environmental protection:

Less laser processing waste, low noise decibel, environmentally friendly clean, safe, non-polluting, greatly improving the working environment

Contacta con nosotros