Why not have one fiber laser cutting machine:Charry

Why not have one fiber laser cutting machine

Why not have one fiber laser cutting machine?

Nowadays,the fiber laser cutting machine is more and more popular.Below is some common materials can be cut by fiber laser cutting machine.

Laser cutting machine for metal materials.

Although almost all metal materials have high reflectivity for infrared energy at room temperature, CO2 lasers emitting 10.6 um beams in the far infrared range to laser cutting practice in many metals. The initial absorption rate of the metal to the 10.6um laser beam is only 0.5% to 10%, but when the focus laser beam with a power density exceeding 106w/cm2 is onto the metal surface, it can finish quickly in the microsecond time. The surface begins to melt. The absorption rate of most metals in the molten state rises sharply and generally increases by 60% to 80%.

Firstly, Carbon steel.

The modern laser cutting system can cut the maximum thickness of carbon steel plate up to 20MM. The slit of cutting carbon steel after oxidation melting and cutting mechanism can be in a satisfactory width range, and the slit of the thin plate can be up to about 0.1MM.

Secondly,Stainless steel.

Laser cutting is an effective tool for the manufacturing industry that uses stainless steel sheets as the main component. Under the strict control of the heat input in the laser cutting process, the heat-affect zone of the trimming can be small.

Thirdly, Alloy steel.

Most alloy structural steels and alloy tool steels can achieve good trim quality by laser cutting. Even for some high-strength materials, straight, non-stick slash trimming is achieved as long as the process parameters are properly controlled. However, for high-speed tool steels and hot-die steels containing tungsten, there is corrosion and slag formation during laser cutting.

Finally,if you want to know about the fiber laser cutting machine.

Contact us.


Fiber laser cutting machine for fitness equipment:Charry

Fiber laser cutting machine for fitness equipment

Fiber laser cutting machine for fitness equipment.

In life, people pay more and more attention to sports.
In order to enhance competitiveness, some gymnasiums add a lot of exercise equipment suitable for indoor sports.

With the continuous development of fitness machinery and equipment, the precision of its parts processing is getting higher and higher. The slit width of the part cutting, the straightness of the edge, the fineness of the stripe, and the smoothness of the parts will affect the quality of the fitness equipment. The shape of the parts in the fitness equipment is diverse. Compared with the traditional processing technology, the automatic CNC laser cutting equipment can better meet the requirements of these modern machines.

Why need fiber laser cutting machine?

In the fitness equipment, one connect one. Firstly to cut pipe.Then to drill the holes on it. The traditional processing method is realized by band saw and drilling machine and special milling machine. This way can not guarantee the beauty. It also does not guarantee accuracy, and it also takes up a lot of labor costs and the time cost of work piece clamping and transshipment.

The laser pipe cutting machine can cut traditional or special-shaped pipes such as round pipe, square pipe, elliptical pipe, bread pipe and D-shaped pipe. It has the advantages of high flexibility, high precision, high efficiency, short production cycle, etc. So the fully automatic processing method can greatly improve the production efficiency of fitness equipment and has become the standard equipment in the manufacturing process of the fitness equipment industry.

Finally,the fiber laser cutting machine has the characteristics of high output per unit time and short tail material. It has high stability and long durability. It can be bundled and automatically loaded. The robot can automatically pick up the robot and can completely say goodbye to high-intensity and high-load labor.

So maybe it is your time to have the fiber cutting machine.

If you have any confusion,just contact us.



Fiber laser cutting machine purchase tips-Teresa

Fiber laser cutting machine purchase tips?
In recent years, fiber laser cutting machine has been widely used in metal, sheet metal and stainless steel processing industries. The technology of fiber laser cutting machine is also quite mature. It has a very large market share in the cutting industry. But for many customers, how to choose a fiber laser cutting machine suitable for cutting their own materials, there are still many problems. The following is about how to buy a fiber laser cutting machine correctly.

Choose a company with good reputation and strength.

The fiber laser cutting machine is a large-scale equipment. It needs to be cautious when purchasing. Choose several powerful manufacturers to communicate in the early stage. Later, you can go to the factory to inspect, for the price of the machine, the training of the machine. Detailed negotiation with payment methods and after-sales services.

Determain your own needs

To take into account their own business scope, what materials need to be cut, the thickness of the material and other factors. And then determine the power of the equipment and the size of the workbench. The current cutting power on the market from 500W ~8000W. And the size of the workbench can be optional according to customer needs.

 Go to the market or online to find out about the consultation

After determining your own needs, we can go to the market or online to find out about the consultation. You can also go to the peers who bought the cutting machine to first look at the performance and basic parameters of the machine, choose several strengths and prices are also favorable. The manufacturer first conducts the preliminary communication. In the later stage, it can conduct on-the-spot investigations, and more detailed talk about the price of the machine, payment method, and after-sales service.

 Choose right laser power of fiber laser cutting machine

When choosing the performance of the laser cutting machine, we should fully consider our own environment. The laser power is very important. For example, we often cut metal sheets below 6mm, then we can choose 500W-1000W laser cutting machine. To meet the needs of production, if you cut more than 6mm of material, we need to consider the machine with a larger power, which is very helpful for the cost control of the enterprise.

 Pay attention to important components of fiber laser cutting machine

Pay attention to the selection of some important components of the fiber laser cutting machine, especially the laser source, laser cutting head, servo motor, guide rail, water tank, etc. Distinguish whether it is domestic or imported. These components directly affect the cutting speed and accuracy of the laser cutting machine. Many domestic manufacturers use domestically produced fake accessories to deceive customers.

 Take after-sales service into account

The after-sales service of each producer is very different. In the after-sales service, the manufacturer should provide customers with effective daily maintenance programs, and have a professional training system to help customers. Solve problems as soon as possible.


No matter how good a laser cutting machine is, it will encounter various problems in the process of using the manufacturer. In the case of problems that the customer cannot solve, the manufacturer can provide the solution in time. Very important. This is also an important factor to consider when choosing a laser cutting machine.
The above is a summary of several purchase techniques for everyone. Hope it can be helpful. If you have any questions, please contact us!
Jinan Xintian Technology Co., Ltd(XTLASER)
Address: No.316 Xinggang Rd., Licheng District, Jinan City, Shandong Provice, China
E-mail: xintian105@xtlaser.com
WhatsApp/Wechat: +8615006829603

5 Reason Why To Use Laser marking machine On Jewelry-lisa

5 Reason Why To Use Laser marking machine On Jewelry-lisa

Laser marking machine

In recent years, more and more people are beginning to take up the hobby of creating customized jewelry. Such customized jewelry is a nice option for a gift. Since the person can engrave any customized message on the jewelry.

One of the best ways to put some message or design on the jewelry is engraving. One form of engraving that every authentic jewelry must possess is marking. There are a number of ways in which this process of marking can be done.

Primarily, there are two types of method for engraving or marking and they are rotary engraving and laser engraving. Both these machines have their own benefits and the jeweler must select the type of machine that is most suitable for his/her needs.

  1. The laser marking machine has a very high-powered laser beam for etching the surface of the material. You can decide the depth of your engraving by determining the intensity of the beam of the laser.


  1. Besides the depth, laser engraver also enables you to select the design with great ease. The operator has to enter design on the computer and from here command is sent to the laser engraver, which engraves the design just as it is entered into the computer.


  1. This computer-guided mechanism of the laser marking machine enables the jeweler to engrave at a very fast pace. This is particularly beneficial for the professional jeweler, who has to meet the supply demands of the customer. One particular use of the fast pace of laser engraving machines is marking. The agencies responsible for the marking need to get the marking done at a fast pace and the only thing that helps them in achieving their purpose is laser marking machine.


  1. With the help of laser marking machines, the designer gets the ability to draw a highly precise pattern on the jewelry. The precise cut and the high accuracy provided by the laser beam gives the designer an opportunity to produce the designs that are highly complex. Jewelry marks usually contain some sort of logo and other information, laser machines can produce all of the marking information at a remarkable speed with high accuracy.


  1. The laser marking machine is possible to mark a wide variety of material. The beam of the laser machine has the ability to penetrate even the hardest of materials. . In contrast, the results with rotary machines do not produce the desired effect

Just contact us for more details, 008615954124625

Automatic loading fiber laser tube cutting machine-ivy

Automatic loading fiber laser tube cutting machine

Today,am just received one inquiry of Automatic loading fiber laser tube cutting machine from Australia. So want to make some information here:

First one is design of Automatic loading:

Basic working processes:

  1. First, put the same type pipe on the nylon belt of the storage area using a forklift or manually.

2.Then, the motor is driven by the nylon belt to send the pipe to the feeding area, and the conveying area sends the pipe to the grabbing position.

3.After reaching the grab position, align one end of the tube with a lever.

4.The gripper grips the tube then feeds the tube to the top of the palletizing device to prepare for chuck clamping.

5.The behind chuck move to the gripping position then clamp the tube.

6.The chuck feeding tube to the cutting position then the cutting starts.

7.After first tube cut done, chuck return to Y axis home, the second tube starts to load.

The principal characteristics of the XTC-T60020 Fiber laser cutting equipment are:

  • Compact design facilitating a wide variety of applications.
  • CNC with laser control function.
  • Resonator with reflective sensors.
  • Simple program for pieces and cutting plans with automatically adapted feed speed and power output for each piece, using CNC.
  • Highly dynamic equipment.
  • Rigidity: high strength transfer due to stability of construction.
  • Durability: enclosed drivers.
  • Accessibility: spare parts service

Furniture fiber laser cutting:Charry

Furniture fiber laser cutting

Furniture fiber laser cutting.

Stainless steel is widely in the industry and in the kitchen.
Such as gas stoves in the kitchen, microwave ovens, gas stove electronic parts, kitchen hardware and so on.
Common stainless steel cutting methods include high-pressure water jet waterjet water cutting, stepping punching, file cutting, disc cutting, grinding wheel cutting, laser cutting and so on.
Among them, stainless steel thin plate laser cutting machine occupies a large proportion in industrial production, and stainless steel cabinets use 1-2mm stainless steel thin plate.
In the processing of sheet metal, the advantages of laser cutting machine are obvious. The laser beam has a short transposition time and is easy to complete continuous processing. The use of laser cutting not only speeds up processing, high efficiency, but also can complete the cutting of any shape of the board. It don’t need to change the mold or tools, shortening the preparation time period. Therefore, the laser cutting machine can effectively reduce the processing cost of stainless steel cabinets. It also help enterprises to occupy the market with more cost-effective products.

In terms of aesthetics, the laser beam of the laser cutting machine is in a small area. Because the energy is very concentrate, only a small amount of heat go to other parts of the steel. And the deformation is small or no deformation, so the processing precision is high, and the section is high. Smooth, stress-free deformation, the processed stainless steel sheet has a higher “face value”.

The advantages of fiber laser cutting machine.

Lower maintenance costs: The equipment is manufactured by the core light source, and the maintenance and repair costs and procurement costs are reduced by 20%.

Higher cost performance: The equipment uses a high-quality cutting process library, which has the same cutting efficiency and cutting quality as imported lasers.

Faster cutting speed: cutting speeds as fast as 50m/min and acceleration of 1.2G.

So if you need the fiber laser cutting machine,contact us.



What gases are needed for metal laser cutting machines?-lisa

What gases are needed for metal laser cutting machines?-lisa

Metal laser cutting machine is a common metal cutting equipment. When using this equipment, you need to choose different auxiliary gas according to different cutting materials. Let us briefly what gas you will need to use on the metal laser cutting machine. Gas, let’s see…

What gases are required for metal laser cutting machines:

At present, the auxiliary gases commonly used in metal laser cutting machines are oxygen, nitrogen, air and argon.
Laser cutting will generate a large amount of during the cutting. When such high heat is concentrated together, the material at the cutting portion is burned, an oxidation reaction occurs, and the workpiece is easily deformed. Therefore, we need to add some auxiliary gases, commonly used are oxygen, air, nitrogen.
Second, when we need to process stainless steel, we should choose nitrogen. Because nitrogen can prevent the oxidation of the incision, the processed incision will not be black. Choose high purity when choosing nitrogen.
Third, if it is to process carbon steel, it is necessary to choose oxygen. Oxygen mainly plays the role of combustion support, which can speed up the processing speed of the workpiece. Of course, the purity of oxygen should be as high as possible.
Fourth, in some processing that is not very precise, we can also choose oxygen, because the use of oxygen is low, and it also has a great auxiliary effect.
In addition to the above functions, these auxiliary gases have many functions in common. These gases can blow away the slag produced during cutting and protect the lens, preventing the slag from sticking to the lens and extending the life of the lens. Air and nitrogen also have a cooling effect that cools the cutting head.
The above is all of our suggestions how to use the gas on the metal laser cutting machine. I hope this article can help everyone.
More info you want to know, just contact us please.
Email: lasermachine02  @xtlaser.com
Mob/whatsapp/skype/wechat: 008615954124625

Four reasons to have fiber laser machine:Charry

Four reasons to have fiber laser machine

Four reasons to have fiber laser machine.

Compared with other lasers, fiber lasers have obvious technical advantages and are widely used. At present, fiber lasers are gradually replacing the dominant position of traditional lasers in laser marking, laser welding, laser cutting and other applications.
For users who use fiber lasers, there are mainly the following advantages.

1. Fast and efficient

For example: fiber laser marking machine.
In the same laser wavelength range, the frequency of the semiconductor laser-pumped solid Nd:YAG laser is generally lower than 50K, while the fiber laser has a higher frequency of up to 2000K, which is the fastest for marking. Even in certain applications, the marking time can be less than 1 s. The laser beam under computer control can move at high speed, and complete the marking process in a few seconds, which can significantly improve production efficiency.

2. High energy efficiency, low cost.

Conventional lasers such as CO2 have a photoelectric conversion rate of only about 10%. The energy consumption of fiber lasers is very low. On the one hand, the energy loss of light transmission in the fiber is very low. On the other hand, the photoelectric conversion rate of fiber laser exceeds 25%, thus greatly reducing energy loss. Compared to lamp-pumped lasers, fiber lasers consume far less power than lamp-pumped lasers, and the efficiency is more than twice that of semiconductor laser-pumped solid Nd:YAG lasers.
Moreover, the structure of the fiber laser is simpler and more compact, the footprint is small, the beam quality is good, the reliability is high, the laser stability is also good, and the loss of raw materials can be reduced. It is perfect for customers who have a diverse range of needs and need to be flexible.

3. Longer life.

The lifetime of the diode module in the fiber laser is longer than that of the lamp pump module. The theoretical life of the fiber laser can reach 100,000 hours. This life is quite long.

4. Easy maintenance.

Since the fiber laser is also an optical fiber, it has the characteristics of maintenance-free maintenance and high stability. It can work in a relatively harsh working environment, has high tolerance to dust, shock, shock, humidity, temperature, and basically does not require professional maintenance, low maintenance cost, and is very convenient for users.

If you are ready to have the fiber laser machine,contact us.



How to choose fiber laser cutting machine-Jill

How to choose fiber laser cutting machine

How to Choose fiber laser cutting machine?We have some many customers buying cutting machine.But they do not know how to choose?which company?which side we should focus on? choose most expensive one?In this article,we teach u how to choose and adjust the best and most suitable fiber laser cutting machine.

Before purchase fiber laser cutting machinery.we should know about the type of the manufacturing process .When purchase ,it mainly depends on Quality of the laser cutting machine.

 Prestige and Status Of company

Choose fiber laser cutting machine.firstly,When we are searching for a laser cutting machine for your organization. We should first look at the Prestige and Status that company holds and its perception in the customers mind. If our company is in the manufacturing, electronics, or even medical sectors, sooner or later, we will require laser marking for your products and components and the best solution for this is a fiber laser cutting machine. The non-contact fiber laser cutting process is well-known among customers for the reasons like Durability, Readability, High-temperature opposition, Application to various materials, No requirement for lethal inks, solvents, or acids.

Big Brands have the strength of the size of the manufacturers which is one of the factors in the selection of manufacturers. Brand Image is one of those factors which come first and foremost in the mind of the customer. Here customers have to choose wisely because not every Manufacturer with Less Price has the worst Quality and also not every manufacturer with High Price have the Best Quality. So, be sure to spend money on the blade. So they need to think many times before purchasing the machinery.

After and before Sales Service

Choose fiber laser cutting machine.Secondly.After and before Sales Service is vital. for the first time.Any company purchasing the machine always looks for those manufacturer .who has been most Prime and Loyal to its Customers. in light of the fact that if the firm is faithful towards one client than that makes renowned effect.

Productivity of the machine

Choose fiber laser cutting machine.Thirdly,Productivity of the machine is the internal aspect. where customer will look. if he has the better technical knowledge about Laser Cutting Machine. This will definitely add value to his purchasing ability. The main aim of any customer is to have the high productivity at low cost. Customers also look for the Accuracy and Efficiency of the machine and also about machine’s capacity on a per hour basis.

 easy Operations

Choose fiber laser cutting machine.last but not the least,Customer looks for the easy Operations of the machine. Easier the Operations of the machines Simpler will be the decision of purchasing the machinery and from which Manufacturer.


More questions just let us know.

Jill from XT LASER
E: xintian101@xtlaser.com
WhatsApp&Wechat&Mobile: +86 130 4603 3839
Skype: lasermachine01

How to choose a suitable laser for the fiber laser cutter?-Angelina

How to choose a suitable laser for the fiber laser cutter?

Fiber lasers are the core components of the fiber laser cutter and it have a large impact on the cutting performance of laser cutting machines.

When choosing a laser cutting machine, what is the module integration method that needs to consider fiber lasers?

The module composition of the fiber laser is divided into single mode and multimode.

In the cutting application, the focused spot has a great influence on the quality of the cut.

The core of the single mode laser is relatively thin, and the beam quality is better than the multimode.

Its energy distribution is Gaussian with the highest energy density in the middle, and the three-dimensional map is a sharp mountain peak.

The core of a multimode laser is coarser than a single mode.

The energy distribution is smaller than that of a single mode.

The three-dimensional image is an average of a single-mode spot.

The three-dimensional image is an inverted cup.

In terms of the steepness of the edge, the multimode is much steeper than the single mode.

1mm thin plate cutting speed of single mode laser is 20% higher than multimode laser, the visual effect is similar.

However,  starting from 2mm, the speed advantage is gradually reduce. Starting from 3mm, the speed and effect of high power multimode laser are very obvious.

Therefore, the advantage of single mode is suitable for thin plate, and the advantage of multimode is thick plate.

Therefore, we cannot compare single mode and multimode with each other.

They are all a configuration of fiber laser.

It is like a car.

The car is suitable for highway and sports car is suitable for mountain.

However, the car can also run the mountain, the sports car can also run the road.

So the choice of multi-mode or single-mode fiber laser depends on the actual end-user processing needs.