Why not have one fiber laser cutting machine:Charry

Why not have one fiber laser cutting machine

Why not have one fiber laser cutting machine?

Nowadays,the fiber laser cutting machine is more and more popular.Below is some common materials can be cut by fiber laser cutting machine.

Laser cutting machine for metal materials.

Although almost all metal materials have high reflectivity for infrared energy at room temperature, CO2 lasers emitting 10.6 um beams in the far infrared range to laser cutting practice in many metals. The initial absorption rate of the metal to the 10.6um laser beam is only 0.5% to 10%, but when the focus laser beam with a power density exceeding 106w/cm2 is onto the metal surface, it can finish quickly in the microsecond time. The surface begins to melt. The absorption rate of most metals in the molten state rises sharply and generally increases by 60% to 80%.

Firstly, Carbon steel.

The modern laser cutting system can cut the maximum thickness of carbon steel plate up to 20MM. The slit of cutting carbon steel after oxidation melting and cutting mechanism can be in a satisfactory width range, and the slit of the thin plate can be up to about 0.1MM.

Secondly,Stainless steel.

Laser cutting is an effective tool for the manufacturing industry that uses stainless steel sheets as the main component. Under the strict control of the heat input in the laser cutting process, the heat-affect zone of the trimming can be small.

Thirdly, Alloy steel.

Most alloy structural steels and alloy tool steels can achieve good trim quality by laser cutting. Even for some high-strength materials, straight, non-stick slash trimming is achieved as long as the process parameters are properly controlled. However, for high-speed tool steels and hot-die steels containing tungsten, there is corrosion and slag formation during laser cutting.

Finally,if you want to know about the fiber laser cutting machine.

Contact us.


Fiber laser cutting machine for fitness equipment:Charry

Fiber laser cutting machine for fitness equipment

Fiber laser cutting machine for fitness equipment.

In life, people pay more and more attention to sports.
In order to enhance competitiveness, some gymnasiums add a lot of exercise equipment suitable for indoor sports.

With the continuous development of fitness machinery and equipment, the precision of its parts processing is getting higher and higher. The slit width of the part cutting, the straightness of the edge, the fineness of the stripe, and the smoothness of the parts will affect the quality of the fitness equipment. The shape of the parts in the fitness equipment is diverse. Compared with the traditional processing technology, the automatic CNC laser cutting equipment can better meet the requirements of these modern machines.

Why need fiber laser cutting machine?

In the fitness equipment, one connect one. Firstly to cut pipe.Then to drill the holes on it. The traditional processing method is realized by band saw and drilling machine and special milling machine. This way can not guarantee the beauty. It also does not guarantee accuracy, and it also takes up a lot of labor costs and the time cost of work piece clamping and transshipment.

The laser pipe cutting machine can cut traditional or special-shaped pipes such as round pipe, square pipe, elliptical pipe, bread pipe and D-shaped pipe. It has the advantages of high flexibility, high precision, high efficiency, short production cycle, etc. So the fully automatic processing method can greatly improve the production efficiency of fitness equipment and has become the standard equipment in the manufacturing process of the fitness equipment industry.

Finally,the fiber laser cutting machine has the characteristics of high output per unit time and short tail material. It has high stability and long durability. It can be bundled and automatically loaded. The robot can automatically pick up the robot and can completely say goodbye to high-intensity and high-load labor.

So maybe it is your time to have the fiber cutting machine.

If you have any confusion,just contact us.



Fiber laser cutting machine purchase tips-Teresa

Fiber laser cutting machine purchase tips?
In recent years, fiber laser cutting machine has been widely used in metal, sheet metal and stainless steel processing industries. The technology of fiber laser cutting machine is also quite mature. It has a very large market share in the cutting industry. But for many customers, how to choose a fiber laser cutting machine suitable for cutting their own materials, there are still many problems. The following is about how to buy a fiber laser cutting machine correctly.

Choose a company with good reputation and strength.

The fiber laser cutting machine is a large-scale equipment. It needs to be cautious when purchasing. Choose several powerful manufacturers to communicate in the early stage. Later, you can go to the factory to inspect, for the price of the machine, the training of the machine. Detailed negotiation with payment methods and after-sales services.

Determain your own needs

To take into account their own business scope, what materials need to be cut, the thickness of the material and other factors. And then determine the power of the equipment and the size of the workbench. The current cutting power on the market from 500W ~8000W. And the size of the workbench can be optional according to customer needs.

 Go to the market or online to find out about the consultation

After determining your own needs, we can go to the market or online to find out about the consultation. You can also go to the peers who bought the cutting machine to first look at the performance and basic parameters of the machine, choose several strengths and prices are also favorable. The manufacturer first conducts the preliminary communication. In the later stage, it can conduct on-the-spot investigations, and more detailed talk about the price of the machine, payment method, and after-sales service.

 Choose right laser power of fiber laser cutting machine

When choosing the performance of the laser cutting machine, we should fully consider our own environment. The laser power is very important. For example, we often cut metal sheets below 6mm, then we can choose 500W-1000W laser cutting machine. To meet the needs of production, if you cut more than 6mm of material, we need to consider the machine with a larger power, which is very helpful for the cost control of the enterprise.

 Pay attention to important components of fiber laser cutting machine

Pay attention to the selection of some important components of the fiber laser cutting machine, especially the laser source, laser cutting head, servo motor, guide rail, water tank, etc. Distinguish whether it is domestic or imported. These components directly affect the cutting speed and accuracy of the laser cutting machine. Many domestic manufacturers use domestically produced fake accessories to deceive customers.

 Take after-sales service into account

The after-sales service of each producer is very different. In the after-sales service, the manufacturer should provide customers with effective daily maintenance programs, and have a professional training system to help customers. Solve problems as soon as possible.


No matter how good a laser cutting machine is, it will encounter various problems in the process of using the manufacturer. In the case of problems that the customer cannot solve, the manufacturer can provide the solution in time. Very important. This is also an important factor to consider when choosing a laser cutting machine.
The above is a summary of several purchase techniques for everyone. Hope it can be helpful. If you have any questions, please contact us!
Jinan Xintian Technology Co., Ltd(XTLASER)
Address: No.316 Xinggang Rd., Licheng District, Jinan City, Shandong Provice, China
E-mail: xintian105@xtlaser.com
WhatsApp/Wechat: +8615006829603

Automatic loading fiber laser tube cutting machine-ivy

Automatic loading fiber laser tube cutting machine

Today,am just received one inquiry of Automatic loading fiber laser tube cutting machine from Australia. So want to make some information here:

First one is design of Automatic loading:

Basic working processes:

  1. First, put the same type pipe on the nylon belt of the storage area using a forklift or manually.

2.Then, the motor is driven by the nylon belt to send the pipe to the feeding area, and the conveying area sends the pipe to the grabbing position.

3.After reaching the grab position, align one end of the tube with a lever.

4.The gripper grips the tube then feeds the tube to the top of the palletizing device to prepare for chuck clamping.

5.The behind chuck move to the gripping position then clamp the tube.

6.The chuck feeding tube to the cutting position then the cutting starts.

7.After first tube cut done, chuck return to Y axis home, the second tube starts to load.

The principal characteristics of the XTC-T60020 Fiber laser cutting equipment are:

  • Compact design facilitating a wide variety of applications.
  • CNC with laser control function.
  • Resonator with reflective sensors.
  • Simple program for pieces and cutting plans with automatically adapted feed speed and power output for each piece, using CNC.
  • Highly dynamic equipment.
  • Rigidity: high strength transfer due to stability of construction.
  • Durability: enclosed drivers.
  • Accessibility: spare parts service

How To Maintenance Of Fiber Laser Cutting Machine?–Anne

How To Maintenance Of Fiber Laser Cutting Machine?

The main components of the laser cutting machine are circuit system, transmission system, cooling system, optical path system and dust removal system.

Genarally, the last three parts are what we need to maintain on  daily basis.

1. Cooling system.

The water inside the water cooler needs to be replaced regularly. The water quality and water temperature affect the service life of the laser tube directly. We usually suggest use pure or distilled water and keeping the water temperature below 35 °C.

Besides,keep water flowing at any time. The cooling water is responsible for taking away the heat generated by the laser tube.

2. Dust removal system.

The fan is used for a long time, and it will be contaminated with a lot of dust. When finding that the suction of the fan is insufficient and the exhaust is not smooth, you need turn off the power and remove the air inlet and outlet pipes on the fan. Then removing the dust inside the fan.

3. Optical path system.

After the machine has been working for a while, the surface of the lens will be covered with dust. Under these circumstances, the reflectivity of the reflective lens and the transmittance of the lens will reduce.

The operator should use absorbent cotton to rub the ethanol and carefully wipe it along the center of the lens to the edge. The lens should be gently wiped during this process, in case the surface coating will be damaged.


Hope this information is helpful for you.

If you have any questions of machine,please tell us.


Furniture fiber laser cutting:Charry

Furniture fiber laser cutting

Furniture fiber laser cutting.

Stainless steel is widely in the industry and in the kitchen.
Such as gas stoves in the kitchen, microwave ovens, gas stove electronic parts, kitchen hardware and so on.
Common stainless steel cutting methods include high-pressure water jet waterjet water cutting, stepping punching, file cutting, disc cutting, grinding wheel cutting, laser cutting and so on.
Among them, stainless steel thin plate laser cutting machine occupies a large proportion in industrial production, and stainless steel cabinets use 1-2mm stainless steel thin plate.
In the processing of sheet metal, the advantages of laser cutting machine are obvious. The laser beam has a short transposition time and is easy to complete continuous processing. The use of laser cutting not only speeds up processing, high efficiency, but also can complete the cutting of any shape of the board. It don’t need to change the mold or tools, shortening the preparation time period. Therefore, the laser cutting machine can effectively reduce the processing cost of stainless steel cabinets. It also help enterprises to occupy the market with more cost-effective products.

In terms of aesthetics, the laser beam of the laser cutting machine is in a small area. Because the energy is very concentrate, only a small amount of heat go to other parts of the steel. And the deformation is small or no deformation, so the processing precision is high, and the section is high. Smooth, stress-free deformation, the processed stainless steel sheet has a higher “face value”.

The advantages of fiber laser cutting machine.

Lower maintenance costs: The equipment is manufactured by the core light source, and the maintenance and repair costs and procurement costs are reduced by 20%.

Higher cost performance: The equipment uses a high-quality cutting process library, which has the same cutting efficiency and cutting quality as imported lasers.

Faster cutting speed: cutting speeds as fast as 50m/min and acceleration of 1.2G.

So if you need the fiber laser cutting machine,contact us.



Fiber Co2 laser cutting machine–Wendy from XT Laser

Fiber Co2 laser cutting machine

Fiber Co2 laser cutting machine.

Firstly, as a manufacturer of CO2 laser cutting machines with output power from 2.2 to 6 kW. True fiber laser machines ranging from 2 to 4 kW. XT LASER is often asked about the benefits of each type of machine. Who is better for specific applications. As there is often some confusion in the marketplace. We outlines below the pros and cons of the two technologies.

1000w cnc laser cutting machine
Briefly, banks of diodes creates the fiber laser. The light is channeled and amplified through fiber optic cable similar to that used for data transfer in metal laser cutting machine.

Secondly, Creation of the light is 200% more efficient than via a traditional CO2 laser.  Delivery is far simpler. With no expensive optical mirrors. The focusing lens, unlike on a conventional CO2 laser machine.

Thirdly, If one examines the price-to-performance ratio of the different models, the main cutting speed benefit of the higher-power 4 kW laser is in mid-range materials from 6 to 8 mm thick. There are also small benefits in thickness capacity when cutting non-ferrous materials, typically an increase of one gauge of material. This helps only customers who cut a lot of material in the 6 to 8 mm range or who wish to cover all eventualities, as it is their only metal laser cutting machine.

CO2 laser

The disadvantages of fiber compared with CO2 mainly relate to the cutting speed when processing thicker materials. Typically above 5 mm. Where the CO2 machine is faster in a straight line. It also has much faster piercing times at the start of the cut. There is also the advantage of a smoother surface finish with the CO2 machine when cutting thicker materials.

Thus,  Sometimes also CO2 laser profilers.

Firstly. Over 70% of fiber laser customers are subcontractors, the remainder being original equipment manufacturers (OEMs). This is surprising. As one would expect OEMs to be more confident about deciding to purchase a fiber laser machine. Where the advantages and disadvantages vary greatly, depending on the products to be cut. Subcontractors can never be sure what the next job will be. What material thicknesses will need to be processed. So theoretically the versatility of a CO2 machine would be more attractive in metal laser cutting machine.

Secondly. Of the subcontractors, only 31% had a single laser profiler after purchasing the fiber machine. Whereas 69% were multiple laser users and could decide which machine to put work onto, CO2 or fiber.

Thirdly. The main reason for purchasing a fiber machine was the speed of cutting thin (1 to 2 mm and up to 3 mm) materials.

Fourth. An important secondary reason was the lower running cost. And the lower power consumption using fiber technology. It was particularly important in companies at the top end of the electrical supply limit in their workshops.

How to maintain the optical lens of laser cutting head?-Angelina

How to maintain the optical lens of laser cutting head?

As we all know, one of the most important components of the fiber laser cutting machine is the laser cutting head with the characteristics of high precision and high price.

The life of the laser cutting head does not affect the operating efficiency of the cutting machine, but also the production cost and benefits of the factory.

What’s more, the most common problem affecting the life of the cutting head is the pollution damage of the optical lens inside the structure.

Today, we will teach how to maintain the optical lens of the laser cutting head.

The possible reasons of lens contamination of laser cutting head

1.The fiber head installation method is incorrect in the cutting head.

For this reason, the main solution is to choose the correct fiber laser head installation method.

Most installers tend to assemble freely the cutting heads, tilting the fiber-optic head installation direction, resulting in inadvertent installation.

We should try to keep the fiber head horizontally installed inside the cutting head and lock it during the installation process.

Besides that we can try to operate in a clean environment avoid dust from rising during the installation process.

Or we can choose to operate in the morning to prevent dust from entering the cutting head.

2.The cutting head itself has a poor sealing effect

For the sealing of the cutting head, it is not always possible to guarantee complete sealing.

Then, a feasible method is to install a breathing system to maintain the internal pressure of the cutting head.

3.Incorrect replacement of the protective window case

Due to the relatively large volume of the protective mirror box, particles are inevitably mixed during the replacement process.

Therefore, we must change the speed  when replacing the protective mirror box.

And we should seal the window with tape or other film.

4.Unreasonable cutting head consumables used

The selection of qualified protective mirrors and “O” type sealing rubber ring can ensure the sealing of the cutting head and prevent the entry of dust particles.

5.Improper laser cutting machine operation

When operating the laser cutting machine, we must strictly follow the equipment instructions and requirements and operate correctly.

Reduce the impact of improper handling on the cutting head.

6.Poor maintenance of the cutting head

The cutting head should be as clean and dry as possible and cleaned regularly.

More details pls contact:

Email: xintian118@xtlaser.com



How Fiber Laser Cutting Machine Works?-Teresa

Fiber Laser Cutting Machine


How Fiber Laser Cutting Machine Works?

Fiber laser cutting machine is a currently popular laser cutting type which adopts fiber laser source to fulfill perfect cutting effect. Fiber lasers are a type of solid state laser that is rapidly growing within the metal cutting industry.

A brief comparison between fiber laser vs CO2 laser

Fiber technology utilizes a solid gain medium, as opposed to a gas or liquid. The “seed laser” produces the laser beam and is then amplified within a glass fiber. With a wavelength of only 1.064 micrometers, fiber lasers produce an extremely small spot size. The size is up to 100 times smaller compared to the CO2, which makes it ideal for cutting reflective metal material.

Fiber laser source can output high-powered laser beam that focuses on the surface of materials, vaporizing or melting the focused area instantaneously. With numerical and mechanical system’s control, the laser head is moved and laser spot is also changed accordingly to achieve automatic cutting with fast speed and high accuracy. Fiber laser cutter has been developed into a highly precise laser cutting type. It is very popular in metal parts processing industries.

Work Versatility of Fiber Laser Cutting Machine for Metals

fiber laser cutting machinemetal laser cutting

Fiber laser cutting machine is able to process a wide range metal materials, including stainless steel, carbon steel, alloy steel, aluminum, galvanized sheet, copper, silver, gold and so on. Therefore, we should choose different laser sources according to metal features.

In addition to sheet metals cutting, fiber laser cutting machine also could process profiled metals and steel pipes. A set of steel pipe cutting system can be configured to the machine to broaden its cutting capacity. The cutting edge is neat and smooth to meet high industrial requirement.

Main Advantages of Fiber Laser Cutting

laser cutting machine

The component of fiber laser cutting machine laser source













  • Fiber laser has higher energy conversion rate that can reach up to 30%, saving operation and maintenance cost.
  • Fiber lasers are designed with semiconductor modular and redundancy, and there is no optical lens in resonant cavity. So no need to spend much time starting and adjusting the machine before cutting work. This is incomparable among traditional laser machines.
  • Protective lens is configured in fiber laser head to protect focus lens and reduce parts consumption.
  • Laser head won’t touch the materials directly so as not to scratch the materials and ensure quality cutting effect.
  • Fiber laser produces the smallest kerf and thermal area, which keeps the cutting stability and avoid deformation of the material.
  • 02mm/min cutting accuracy and fast cutting speed markedly increases the work efficiency of metal parts manufacturing.
  • Fiber laser cutting machine works in a safe and environmentally friendly way. There is little pollution and noise producing and workshop environment will be safe.

As a professional fiber laser equipment manufacturer, we are professional in fiber laser cutting machine and fiber laser marking/engraving machine manufacturing and technical service. For more details about fiber laser cutting machine selection and operation, please contact us for customized laser solution to upgrade your business.

What gases are needed for metal laser cutting machines?-lisa

What gases are needed for metal laser cutting machines?-lisa

Metal laser cutting machine is a common metal cutting equipment. When using this equipment, you need to choose different auxiliary gas according to different cutting materials. Let us briefly what gas you will need to use on the metal laser cutting machine. Gas, let’s see…

What gases are required for metal laser cutting machines:

At present, the auxiliary gases commonly used in metal laser cutting machines are oxygen, nitrogen, air and argon.
Laser cutting will generate a large amount of during the cutting. When such high heat is concentrated together, the material at the cutting portion is burned, an oxidation reaction occurs, and the workpiece is easily deformed. Therefore, we need to add some auxiliary gases, commonly used are oxygen, air, nitrogen.
Second, when we need to process stainless steel, we should choose nitrogen. Because nitrogen can prevent the oxidation of the incision, the processed incision will not be black. Choose high purity when choosing nitrogen.
Third, if it is to process carbon steel, it is necessary to choose oxygen. Oxygen mainly plays the role of combustion support, which can speed up the processing speed of the workpiece. Of course, the purity of oxygen should be as high as possible.
Fourth, in some processing that is not very precise, we can also choose oxygen, because the use of oxygen is low, and it also has a great auxiliary effect.
In addition to the above functions, these auxiliary gases have many functions in common. These gases can blow away the slag produced during cutting and protect the lens, preventing the slag from sticking to the lens and extending the life of the lens. Air and nitrogen also have a cooling effect that cools the cutting head.
The above is all of our suggestions how to use the gas on the metal laser cutting machine. I hope this article can help everyone.
More info you want to know, just contact us please.
Email: lasermachine02  @xtlaser.com
Mob/whatsapp/skype/wechat: 008615954124625