Co2 laser engraving machine cutting 6mm Plywood-Angelina

Co2 laser engraving machine for cutting

1.An brief introduction of Co2 laser engraving machine

Co2 laser engraving machine,as is known to all, could both cut and engrave.

Both of these two functions are popular among the market.

Besides,there are different types about this machine:600*900,600*400,1300*2500 working area.

The customers could choose according to their different needs.

Yesterday there is a customes coming from Dubai, he wants to cut 6mm plywood, and the working are is as big as A3 paper.

According to his requirements, I introduce the 80w machine with  600*400 working area.

Here is the machine photo for your reference:

co2 laser engraving machine

The machine parts:

engraving machine parts

engraving machine parts

2.The applied industry of the machine

The co2 laser engraving machine mainly apply to the printing industry, processing on the rubber sheet,plywood  as well as hard board.

Besides, it could also apply to crystal engraving, handicrafts industry, and Acrylic sheet,etc.

So here u can see it could apply to many different industries. Showing some samples:

engraving cutting samples

3.The machine parameter

Machine Model XTE-6040
Working size 600mmL*400mmW
Laser tube power 80W
 Cooling mode    Water cooling and protection system
Laser type  Yongli Co2 laser tube
Highest scanning precision 2500 DPI
Cutting speed 0-40000mm/min
Max moving Speed 30000mm/min
Resetting positioning <0.01mm
Min forming character 1x 1mm
Operating temperature 0 – 45°C
Operating humidity 5-95℃
Power supply  220V±10% 50HZ or 110V±10% 60HZ
Picture Formats Supported   PLT/DXF/BMP/AI (Direct output)

JPG,GIF,PGN,TIF(Conversion output)

4.Machine accessories

Standard Features 1 USB port
2 DSP offline control, LED panel
3 RD control system or Lasercut
4 Air pump
5 Water pump
6 Exhaust Fan
7 Fan tube
8 Laser tube (installed in the machine)
9 Lens and Mirrors (installed in the machine )
10 Lamp
11 Water flow sensor
12 User manual of machine(English version)
13 User manual of software
14 USB cable
15 Communication cable

The testing video for 6mm plywood with 80w machine

In the end, if this passage is useful to u , as well as bring u some help, and u are also interested in it,

pls contact me :

Email:xintian118@xtlaser.com

whatsup:+8613335191585

Skype:angelinaxtlaser@outlook.com

Contacta con nosotros