Fiber laser marking machine common problems and solutions-Ivy

Fiber laser marking machine common problems and solutions
Fiber laser widely used in marking electronic components, handicraft laser marking, non-metallic materials, etc. So fiber laser marking is another great innovation after laser cutting, laser drilling, laser welding and other technical applications. And you can see the fiber laser marking machine common problems and solutions.

It is a new breakthrough in processing technology. And it is a new type of non-contact processing, no chemical pollution. And no wear and tear. However, the fiber laser marking machine will have some common problems in the application process. And you can see the fiber laser marking machine common problems and solutions.

Then the following micro-embedded electromechanical small series introduce for everyone. And you can see the fiber laser marking machine common problems and solutions.

1. The laser marking machine indicator light is on. And no laser output;

Analysis of the cause:

Then the field lens lens cover was not removed. And the power percentage setting was too small;
And Solution:

Therefore, remove the field lens lens cover and adjust the power percentage.

2. The power indicator is off;

Cause analysis:

So the power cable not connect. And the power indicator broke.
Solution:

While connect the power cord. And replace the indicator.

3. And the laser marking machine indicator light is not bright and there is laser output;

Cause analysis:

However the laser indicator light damage;
Solution:

Then replace the laser indicator.

4. The laser marking machine indicator light is not bright. And no laser output;

Analysis of the cause:

Therefore the signal cable not connect well;
Solution:

So reconnect the signal line.

Then if you want more machine information. And if you want to know how to use the machine? Or you want to choose one good fiber laser marking machine. Hope can contact with us!

Email:xintian108@xtlaser.com

wechat/whatsapp:0086 17864184107