Fiber laser metal cutter cheap price: Charry

Fiber laser metal cutter cheap price

Fiber laser metal cutter cheap price

The thickness of the carbon steel cut, the laser output power decide the cutting thickness.

Take carbon steel as an example, a 1KW laser cutting machine can cut 10mm, 1.5KW can cut 16mm.

For stainless steel, a 1.5KW laser cutting machine can only cut 5 mm. if Thicker, you need to configure more than 2kw 3kw high-power laser.

However, for carbon steel plates up to 10 mm, a fiber laser cutting machine up to 1000 W can be cutting. Because the cutting width of the laser cutting is narrow, generally between 0.1 and 0.5 mm. the cutting accuracy is very high, less than 0.05 mm.And the distance error of the hole center is between 0.1 and 0.4 mm.And the error of the outline size is also 0.1 to Between 0.5mm. cutting section is smooth.

Fiber laser metal cutter cheap price

Some advantages of fiber laser cutting:

Firstly, the accuracy is high. the positioning accuracy is 0.05mm, and the repeat positioning accuracy is 0.02mm.

Secondly, the cutting quality is good.no contact cutting, the heat effect of the cutting edge is very small. There is basically no heat deformation of the work piece.completely avoid the formation of the edge of the material punching. the slit generally does not require secondary processing.

Thirdly, the hardness of the material being cut.The laser can process steel plates, stainless steel, aluminum alloy plates, hard alloys, etc. No matter what kind of hardness, it can cut without distortion.

Finally, saving investment in the mold. Laser processing does not require a mold, no mold consumption, no need to repair the mold, saving the time to replace the mold. Thus saving processing costs and reducing production costs, especially for large-scale product processing.

One cutting testing show you:

If you want to know more,just contact me:

Email:xintian111@xtlaser.com

Whatsapp:+8618253165863

Contacta con nosotros