How to improve marking efficiency in fiber laser marking machine-Chris

How to improve marking efficiency in fiber laser marking machine

How to Improve Marking Efficiency in fiber laser marking machine ? This is a really important thing to consider when using the machine.

Fiber laser marking machine’s aim is to bring higher production efficiency and create higher value to the enterprise. We all want to mark faster when using the machine. But how to improve the marking speed of fiber laser marking machine?

First,influence factors

The main influence factors of fiber laser marking machine are divided into internal factors and work piece processing factors.

The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power. And auxiliary gas substances during reasonable optical shaping and matching processing  also relate. We should be pay attention to internal factors when selecting and selecting the early models. And we should also follow the opinions of laser engineers to select and purchase the models.

Another factor that we need to pay attention to during customer processing is mainly marking density, marking width, marking depth and laser spot size.

First, marking density
Under the conditions of the same width, the same light spot and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

Second, marking format
Because the deflection area of the galvanometer for large-format marking increases, the marking speed of large-format is slower than that of small-format marking.
Third, marking depth
According to the demand, if the depth of marking needs to be deepened, the parameters of fiber laser marking machine need to be adjusted to increase the power and current of fiber laser marking machine and other factors, thus affecting the marking speed in these processes.

Method to improve efficiency

First, select a small-amplitude field mirror within a suitable range.
Second, control the density during marking and select a small density within the range that can meet the requirements.
Third, ensure the daily maintenance of the machine and keep it in good condition.