Mopa marking machine of color mark-Angelina

 Brief introduction of JPT Mopa marking machine

Mopa marking machine, with its unique color marking, has become more and more popular in recent years.

Many manufacturers would like to use this characteristic to attract the consumers, also the customers like this type machine.

Comparing with fiber laser marking machine,  the Mopa marking machine has one unique features.

That is marking color on aluminium oxide.

Besides, it is nearly the same as the fiber laser marking machine. It could also mark color on the stainless steel.

And it is easy to adjust the parameter, also the outcome is very good.

1.Here show some photos of the machine:

mopa marking machine

This type is  20W Mopa fiber laser marking machine, which could use for 100000 hours. with high quality, it is the most popular in our company.

2.The features of fiber equipment

MOPA Pulsed fiber lasers make use of Master oscillator power amplifier configuration,and show excellent laser performance ,as well as high level of temporal pulse which shaping controllability. As compared to the Q-switch technology,the pulse repetition frequency (PRF) and pulse width , they can be controlled independently in MOPA configuration,while the peak power of the fiber laser,it  can be well maintained.This technology doesn’t require external chiller units , lamp changes, and many of the other somewhat tedious ,upkeep procedures that other systems do.

Simple periodic filter changes and basic cleaning techniques will keep your laser running optimally for a very long time. F-Series laser systems also have the benefit of a very long lifespan. Fiber technology, in general , is rated for 100,000 hours before needing any replacements.

 3.Technology parameter table

Technology index XTL-FP20
Laser parameters optical maser MOPA  Fiber laser
Laser wavelength 1064nm
Average output power >20W
impulse frequency                    0-400kHz
Modulation frequency range 20kHz~80kHz
Galvo parameters Maximum speed 7000mm/s
resolution 0.001mm
Repositioning precision 0.003mm
Optical output characteristics

 

Marking range F = 160 mm, range 110 x 110 mm (with standard)
Minimum line width 0.01mm
Minimum height of characters 0.2mm
Cooling system Cooling way Air cooling
System properties Laser power supply 0.5KW/AC220V/50Hz
Manual working table stroke Movements itinerary 285 mm (desktop type)
Environmental requirements 0 ~ 35 ° C, 90% or humidity

4.Samples

mopa marking machine samples

contact Angelina Michael

wechat:15965618161

mobile/whatsup:+8613335191585

skype:Angelinaxtlaser@outlook.com

 

Contacta con nosotros