The rapid increase of water temperature in metal laser cutting machines
Metal laser cutting machine is a high-tech product invented in the era of rapid industrialization.
Its advanced technology and processing technology is popular in various industries.
The birth of laser cutting machine has laid the foundation for industrial development.
However, when using a metal laser cutting machine, many operators will find that the metal laser cutting machine occasionally heats up too fast.
And we all know that water plays a key role in the metal laser cutting machine.
Then, what are the reasons for the water temperature of the metal laser cutting machine rises rapidly?
1.When the metal laser cutting machine is operated, the surrounding ambient temperature is high.
2. Metal laser cutting machine works too much.
3.The metal laser cutting machine has worked a long time, so it is necessary to stop the machine properly.
4.The outlet pipe of the cooling water is not flowing properly, resulting in a smooth flow of water.
5.The water inlet and outlet pipes of the pump are dirty, and the water pipe is blocked, which makes the water flow poor.
All of the above are the reasons why the water temperature of the metal laser cutting machine rises rapidly.
In fact, it is very simple to troubleshoot these abnormalities, and is not troublesome to operate.
Solution to the high temperature of metal laser cutting machine
As we all know that the metal laser cutting machine needs a lot of water to cool the high temperature inside the laser tube to ensure the normal use and service life of the laser tube.
However, when we use the laser cutting machine normally, the water inside the cooling water tank is easy to happen.
The water temperature is too high, especially in summer, it takes less than 2 hours to heat up.
If we do not replace in time, the power of the laser tube will drop significantly.
Then the cold water device is particularly important.
The chiller of the laser cutting machine must be regularly maintain, in order to ensure that the machine is in good condition.
If you encounter a fault, remember not to dispose of it yourself.
You should ask a professional technician to repair it.
Do not disassemble the machine yourself.