welding plate worktable and Manganese Steel Gantry of cutter-ivy

 welding plate worktable and Manganese Steel Gantry of cutter-ivy

XT LASER choose the welding plate worktable and Manganese Steel Gantry of fiber laser cutting machine,here sharing with you more details:

There are three kinds of worktable in the market now: cast iron square tube, and weld plate.

. Cast iron:
First:there will surely be some faults in Iron casting machine bed, especially for current factories, who produce machine beds. Most of them only choose some mixed, not good quality irons, as a result, machine quality can not be assured.
Second: Casting Iron Machine Body will have many bubble inside and we can’t check it by ordinary equipment. these bubble will make bed not solid. After long time running. Machine bed may breakage

 . Square tube :
The squire tube worktable  once the screws on machine bed are loose, hard to fix it.
During fiber laser cutting machine running processing, there is many shake, after several months, machine bed have big problem

. Welding plate worktable:   (XT LASER choose)

a. This kind of machine bed has strongly reasonable structure, it is produced by relief annealing, so the whole structure is very firm and hard to be deformed.
b. For thick plate welding machine bed, inside the metal plates are solid. So, even after long time of running, it will still remain stable.
c. After long time of using , some screws may become loose, but do not worry. Because you just make screws more tight, that is all.
No need worry about loose screws.

XT LASER choose Manganese Steel Gantry

There are three kinds of gantry in the market now: Welding Tube Gantry /  Casting Aluminium Gantry / Manganese Steel Gantry

  Welding Tube Gantry
This gantry is too heavy, so it will restrict accelerating speed of machine.

  Casting Aluminium Gantry 
it is light, and can make accelerating speed higher. But it has no same rigidity as Welding Tube Gantry, so there will surely happen: Loose screws, Deformation .etc .
Most of the Casting Aluminium Gantry is never under Hot Treatment, so there will be 0.05- 0.1mm deformation after one year or two years. The accurancy will decreade badly.

  Manganese steel gantry :(XT LASER choose)
has advantages over the two other gantry. With lighter weight than weld tube gantry to keep high speed acceleration .
Also Our Manganese Steel Gantry is processed by Hot Treatment. The rate of deformation in Manganese Steel Gantry is only 1/3 to Welding Tube Gantry.

Contacta con nosotros