Fiber laser cutting machine error cause
Now fiber laser cutting machine is really hot selling in our customers for metal cutting. However, when you long time using, will have some issue happen. You can see the fiber laser cutting machine error cause.
1. The thickness of the cutting material exceeds the standard. Generally, the thickness of a sheet that can be cut by a metal laser cutting machine is less than 12 thicknesses. The thinner the sheet, the easier it is to cut and the better the quality. If the plate is too thick, the laser cutting machine is more difficult to cut, and in the case of ensuring the cutting, the machining accuracy will be inaccurate, so the thickness factor of the plate is determined.
2. The laser output power is not up to standard. When the laser cutting machine is running and debugging, it is necessary to ensure that the laser output power reaches the standard. Generally, the higher the output power of the laser, the better the quality of the cutting on the same thickness of the plate.
3. The roughness of the cut sheet. In general, the flatter the surface of the cut material, the better the quality of the cut.
4. The focus position is not accurate. If the focus of the laser cutting machine is not aligned, it directly affects the cutting accuracy, so the calibration should be calibrated before running. You can also purchase the Jinan Jinwei engraving autofocus laser head when purchasing the machine, auto focus, to ensure cutting accuracy.
5. Processing speed. The cutting speed of the laser cutting machine directly affects the machining accuracy. Therefore, it is necessary to achieve the best match between the cutting speed and the material before running.