Metal Fiber laser engraving machine have more and more application now. Especially on metal product, such as stainless steel, carbon steel, aluminum, brass etc.
In order to meet different process demand, metal fiber laser engraving machine also many different application, including color marking, deep engraving, rotary marking etc.
Color Laser Marking
Metal Fiber laser engraving machine can do simple color on stainless steel, such as red, blue, black, white, pink etc. Also it can do black color on Ti, and mopa fiber laser marking machine can do black on anodized aluminum. But for other material, we can only do ordinary marking one white color. It is not possible to do more color.
Also there is many customers use fiber laser engraving machine on deep engraving. The metal is more soft, it is more easy to do deep engraving.
For aluminum and brass, it is easy to do depth. With 30w fiber laser engraving machine we can make more than 1mm depth. Due to carbon steel and stainless steel is very hard, it will take much more long time when we need do deep engraving. Usually 0.5mm is ok for 30w laser.
When we do deep engraving, we need copy two layer. The first layer is low speed and high power so that we can strip the metal material. The second layer is high speed with low power so that we can clean the small slag when do deep engraving.
Due to deep engraving need break the surface of material, so the engraving surface will be rust after some time. So only for some metal parts or mould, people will do deep engraving. Near no people do it on stainless steel.
Fiber laser engraver also have wide application on jewelry cutting, such as gold, silver and brass. 30w laser can cut 0.5mm thickness common and 50w can cut 1.0mm thickness common.
This is one of the most common application of fiber laser marking machine now.
If you want to know more details about this machine, you can contact me by below:
Phone/whatsapp: 0086 187 6615 2065