Nowadays, more and more customers are planning to buy a fiber laser marker.
Not only do they require the machine quality,but also the machine price.
In a word, they want to choose one machine which are both high quality and reasonable price.
But how to choose a reasonable fiber lase marker?
Here I will give u some advises.
1.The most important part of fiber laser marker
As in known to all, the laser source is the most important part of the machine.
Choosing a good laser source decides the using time of the machine.
Most of the customers would choose the IPG, Germany brand, cause the quality is excellent.
However, the price is also high very much.
We often introduce the Raycus laser source to them, which maybe strange to some customers.
XTL-FP series optical fiber laser marker use 1064 nm Raycus as the sources are used to pump.
And the average working hours can up to 100000 hours.
Small and exquisite Volume , applicable in the bad environment
Optical fiber surface area/volume ratio is high, also good cooling effect.
There is no need huge water cooling system, just simple air cooling, can be running in bad conditions.
For example, high impact, high vibration, high temperature, dirt under the conditions of the normal operation.
The raycus laser source is the best brand in China, we have introduced it to many customers.
It is both with low price and high quality.
Therefore, if customer’s budget is limited, Raycus would be a better choice.
2.The power requirement of the machine
It is known to all that there are many different powers of the machine, such as 20/30/50, etc.
The bigger the power is, the higher the price would be.
If the customer only need want to mark on the surface,20w with raycus laser source is enough.
If they want to depth, maybe choose 30w or 50w, or even higher.
It depends their requirements, different depth needs different power.
More information pls contact Alex Wang:
Phone/whatsapp: 0086 18766152065