How to improve fiber laser marking machine marking speed
The purpose of fiber laser marking machine is to bring higher production efficiency and create higher value to enterprises. So how to improve fiber laser marking machine marking speed?
Desktop fiber laser marking machine
First, the main factors affecting the optical fiber laser marking machine divide into two factors. The internal factors and the processing work pieces.
The fiber laser marking machine internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, reasonable optical shaping and auxiliary gas processing. The internal factors are mainly in the early stage selection, should follow the advice of the laser engineer to choose and purchase. Another factor needs to pay attention to in the process of customer processing. Then mainly for marking density, marking amplitude, depth of marking and size of laser spot.
Two, marking density
When the same width, the same spot and the same depth, the higher the marking density. And the slower the corresponding marking speed. So the reason is that the density directly increases the area of the marking.
Three. Marking amplitude
Because the deflection area of the large scale marking mirror increase. The marking speed of the large scale is slower than that of the small plane.
Four, marking depth
According to the demand, if we want to deepen the marking, we need to adjust the parameters of the fiber laser marking machine. And increase the power and current of the fiber laser marking machine. So we will affect the marking speed in these processes.
Five. The size of laser spot
The smaller the light spot is the smaller the corresponding marking volume. So the greater the spot, the faster the marking.
And the above is the skill to improve the marking speed of fiber laser marking machine. So I believe that if you follow these methods, you will be able to improve the speed of marking and create higher interests.