Solution for laser cutting machine common problems

In the process of using more or less, the cutting head of the device is unstable. Which may cause the problem of incorrect contact or follow-up distance. Solution for laser cutting machine common problems

This generally cause replacing the cutting nozzle, the cutting nozzle overheat, or the parameters are not equal.

Reasons and solutions of fiber laser cutting machine.
In either case, the result is that the capacitance of the moving head changes. Which directly affects the stability of the laser cutting head. Reasons and solutions for fiber laser cutting machine.

The fiber laser cutting machine has unstable laser cutting head, re-measure the capacitance value.  And save the parameters. The Chinese and Russian lasers summarize the following experiences for your reference. Reasons and solutions for fiber laser cutting machine.

1. The cutting head follows the distance too much.

Open the follower head debugging software, observe whether the following distance set correctly. Adjust the upper and lower limit values ​​of the cutting head, increase the same proportion. And test the appropriate value. Reasons and solutions for fiber laser cutting machine.

2. The laser cutting head is normal after hitting the board.

This kind of situation is generally a parameter problem. The upper and lower limits of the laser cutting head can be reduced in proportion, and the laser cutting head will follow normally. Reasons and solutions for fiber laser cutting machine.

3. During the cutting process, the laser cutting head suddenly rises automatically.

When this happens, be sure to stop the laser operation immediately and observe whether the copper nozzle of the follower head is hot. If the heat is indicated, the laser light path is not correct, causing the copper nozzle to overheat and the capacitance value to change. Generally, the optical path can be adjusted to solve such problems. Reasons and solutions for fiber laser cutting machine.

If you want more information for the fiber laser cutting machine, please let us know. Then we can send more information to you.